La SA300 era una gran camera per l'epoca:
MIRROR-UP
If you wish to reduce the camera's mirror vibration. use the mirror-up function.
While pressing the Drive Mode Button, turn the A-dial until the " UP" appears on the LCD panel.
When you press shutter button "Half-way", the shutter speed and aperture value will be displayed and the exposure value memorized. As you press the shutter button further, the mirror will move up.
To release the shutter, press the shutter button again.
The camera will cancel the mirror up mode if the shutter is not released within about 5 minutes of mirror up.
Once you set the Mirror Up Mode, the camera continuously holds that mode until you set the mode dial to the L position
To reduce the vibration, you can use the remote controller to release the shutter See the '`Remote Controller" section for more details.
